Koch-Chemie Gp3.01 Gelcoat Micro Cut & Finish Polishing Compound (1 Litre)
Machine polish for slightly weathered and matted gelcoats and boat paints for the permanent removal of polishing haze, holograms and scratches. At the same time, Gelcoat Micro Cut & Finish offers a brilliant and durable high-gloss finish even on dark and similarly sensitive colours under extreme light conditions, thanks to its special abrasive particles. Thanks to the carnauba wax it contains, no separate sealing of the surface is necessary. High yield, easy to polish and easy to wipe off. Contains silicone.
Areas of Use
For the permanent removal of polishing haze, holograms and fine scratches on gelcoats and boat paints with simultaneous sealing.
Recommendations for Use
Can be applied using an eccentric polishing machine. Apply 5 pea-sized drops on a suitable polishing pad (Micro Cut Hard Pad) and work in a crosswise motion. Spread the product on the surface at low speed and then process at the highest speed. Buff out the polish and remove any remaining polish with a Polish & Sealing Towel. Subsequent sealing is not necessary due to the wax components contained in the product.
Shake before use. Check for suitability and compatibility before use. Do not use on hot surfaces. Protect from frost and excessive heat. Do not use on unpainted plastics and rubber.
Product Information
Safety Data Sheet
Original: $92.45
-65%$92.45
$32.36Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Machine polish for slightly weathered and matted gelcoats and boat paints for the permanent removal of polishing haze, holograms and scratches. At the same time, Gelcoat Micro Cut & Finish offers a brilliant and durable high-gloss finish even on dark and similarly sensitive colours under extreme light conditions, thanks to its special abrasive particles. Thanks to the carnauba wax it contains, no separate sealing of the surface is necessary. High yield, easy to polish and easy to wipe off. Contains silicone.
Areas of Use
For the permanent removal of polishing haze, holograms and fine scratches on gelcoats and boat paints with simultaneous sealing.
Recommendations for Use
Can be applied using an eccentric polishing machine. Apply 5 pea-sized drops on a suitable polishing pad (Micro Cut Hard Pad) and work in a crosswise motion. Spread the product on the surface at low speed and then process at the highest speed. Buff out the polish and remove any remaining polish with a Polish & Sealing Towel. Subsequent sealing is not necessary due to the wax components contained in the product.
Shake before use. Check for suitability and compatibility before use. Do not use on hot surfaces. Protect from frost and excessive heat. Do not use on unpainted plastics and rubber.
Product Information
Safety Data Sheet
